192.168.1.2

192.168.1.2

——————–

———-

stands for an IP address which some router manufacturers use as a router default address.

——————–

In most of the cases, this IP address – 192.168.1.2 – is used by private home network computers.

——————-

This IP address belong to class C IP addresses, meaning it falls into the range that starts with 192.168.0.0 and goes through 192.168.255.255.

————————

Some of the frequently used private IP addresses belonging to this range are 192.168.1.1 and 192.168.2.1. (Those two mentioned IP addresses are perhaps more frequently used than 192.168.l.2.) .

————————-

It is  the default IP address for home broadband routers and access points are usually sold in some models other than American.

———————–

Use 192.168.1.2 to connect  to the router .

———————-

If the router uses the address on the local network for 192.168.1.2 , you can log on to the router’s  console through the web browser to point  to http://192.168.1.2

Some manufacturers using 192.168.1.2

—————————-

This IP address is set to the default of some PHILPS , God’s brain and some other routers and access points to manufacturer .

————————

However , any computer on a router or local network can be set to use 192.168.1. (in order to avoid the address conflict , it is only on the network that  a device should use it ) .

—————————-

192.168.1.2  is a private IPv4 network address , which means you can not connect to the router , use the address from outside the home network . Instead  , you must use the router’s public IP address .

—————————-

All companies produce a modem device in order to provide easy access to up to date software installs .

————————–

If the software application users from any internet connection problem when confronted with the device in a way that’s easy to control and modify the settings by accessing the features a chance

—————————–

What can you do with 192.168.1.2 ?

 ————————-

————–

if you make and enter IP address 192.168.1.2 , you will access the full electronic network as authoritative.

———————–

 The software for the router to offer wired and wireless device features and options, you can make the necessary repairs and, thanks to the required settings.

———————–

192.168.1.2 can be a Gateway or an IP address.

———————–

 This is something that can confuse some users.

———————-

 So if you want to find out whether it is an IP or a Gateway, just find Command, then type ipconfig /all , and you will be able to see all of it: IP Address subnet mask Default Gateway and DHCP server. Just see where 192.168.1.2 is and that’s it.

————————

When you access the administration panel of your device is DNS, PROXY, network management, WLAN (WiFi), LAN, WAN Protocol settings, Virtual routing, IP Qos, NAT virtual server, DMZ, a variety of security options, DHCP client, WPS, DSL, ADSL, blocking, and other MAC can perform easily different base adjustments.

———————————-

How Private IP Addresses Work

————————–

———-

There is no special meaning or value to individual private IP addresses — these are simply designated as “private” by the Internet Assigned Numbers Authority (IANA), the global organization that manages IP addresses.

————————

 A private IP address is used on a private network only, and cannot be accessed from the internet, but only by devices on the private network itself.

—————————

This is why modems and routers can operate easily using the same, default, private IP address.

———————

To access a router from the internet, you must use the router’s public IP address.

The range of addresses reserved by IANA for use on private networks is in the range of 10.0.x.x, 172.16.x.x and 192.168.x.x.

————————-

Why is 192.168.1.2 So Common?

————————-

Manufacturers of routers and access points must use an IP address within the private range.

———————

Early on, mainstream broadband router manufacturers like Linksys and Netgear chose the 192.168.1.x as their default.

———————–

 Although this private range technically begins at 192.168.0.0 ,

 most people think of a number sequence as starting from one rather than from zero, making 192.168.1.1 the most logical choice for the beginning of a home network address range.

—————————

With the router assigned this first address, it then assigns addresses to each device on its network. The IP 192.168.1.2 thus became the most common initial assignment.

————————–

A networked device does not gain improved performance or better security from its IP address, whether it is 192.168.1.2, 192.168.1.3 or any other private address .

————————-

192.168.1.2 IP Address

—————————–

————–

One of the main features of private IP addresses is that they can not make your computer recognizable outside your home or office network (or on the Internet).

————————–

 That fact brought up an issue on their accessibility and question about their good and bad sides.

————————–

But if taken to consideration all the threats coming from the Internet, it turned out that the private IP addresses are pretty useful stuff in this point.

————————

Private IP address mean that the IP address is used in private networking (home or office for example/0 and outside the internet (this is where you should make a distinction : home network may be connected to the internet , but that does not make them the parts of the internet .

———————

IP address can be static and dynamic .

IP address (also called fixed IP address ) is the same every time you turn on your computer  ——————–

Dynamic IP address is automatically assigned on broadband network by DHCP servers .

Regarding the internet sessions , dynamic IP addresses are temporary .

—————————

How do I go to the address of 192.168.1.2?

————————————-

—————–

When connecting to the Internet, the router serves as a gateway. Speaking of router, its major functions are transferring information and making sure where the information actually goes in the end.

——————–

It defines a path (a route) through which the data will be transferred.

——————–

It is important that data end up just in the place where it is needed, not in wrong destinations.

———————–

Router joins different networks, passes the information to one another and in the same time prevents data from unnecessary spill over and going around through more networks than it is needed – that would be – something like preventing information from flowing into all directions without control.

————————-

The name itself tells about its function of making a route for the data. Logically, to do that, it must be located where the networks meet.

————————-

While your modem management control panel in order to achieve a fully qualified , you have to do is quite easy.

———————-

 Just simply login to http://192.168.1.2.

———————

You can type the address into your browser , you can copy or you can log in by clicking on the button on our site.

————————-

faced the most users is to enter the wrong password errors.

————————

 If you don’t know your username and password, you must follow our writing on ways you can learn from our under annotation.

——————————-

What can you do if you forget your password by default?

If you forget your password, you must reset your device. Here’s the Default Modem Passwords:

Click here

 

Leave a Reply