Category Archives: Uncategorized

10.0.0.1

Router Username and Password List

10.0.0.1 Modem device .

——————————

 It allows you to access the administration panel as a full official address is.

————————————-

 Is the production of almost all modems, networking firms as the short time and easy accessible to devices provide software to date on behalf of the frontier.

———————————–

 Thanks to this software and application users from any internet connection problem when they live their devices can access in an easy way and can have a chance to change by checking the settings.

———————————

Is a class A IP address which is reserved for private network, we can usually see this IPV4 address used by router factories as their routers’ default gateway address.

——————————

 Other commonly used reserved IP addresses are 192.168.1.1 and 192.168.0.1.

——————————–

 Comparing to public IP addresses(if you are using a dial-up network, you can check your public IP at many websites) which need to be unique in the entire internet, 10.0.0.1 need to be unique in its own local area network.

——————————-

 So it’s very convenient using this IP address to setup your own network such as company’s local network, school’s local network.

——————————

The IP address 10.0.0.1 is sometimes used as a default local address for network router .

—————————

 Some Cisco brand routers and Infinity routers supplied by Comcast commonly have 10.0.0.1 as their default.

——————————

This same address may be used instead by any other private network device but by convention is normally assigned to a network gateway  or other kind of network server .

———————————

What is a Gateway Address?

10.0.0.1 is called a  default gateway address when it represents the local side of a router or  wireless access poin connection to the Internet.

——————————-

Client devices see this address appear in their TCP/IP network gateway settings after joining the local area network (LAN).

—————————————–

 In classful IP networks, 10.0.0.1 is a Class A address with default subnet mask 255.0.0.0.

————————————

What can be done with 10.0.0.1 ?

——————————————————

————————-

When you enter the ip address of 10.0.0.1  if your device as you have reached the full authority electronic network.

—————————

 Within the router software on your device to offer options and features, you can perform the required settings and fixes.

——————————-

By accessing the administration panel of your modem PROXY, DNS, network management, WLAN (WiFi), LAN, WAN Protocol settings, Virtual routing, IP Qos, NAT virtual server, DMZ, a variety of security options, DHCP client, WPS, DSL, ADSL, MAC can perform basic blocking and many other adjustments.

———————————-

Use the ping utility to determine whether any device on the local network is actively using 10.0.0.1.

—————————

If assigned to a router, administrators can reach its console by pointing a Web browser to

http://10.0.0.1 

that in turn will prompt for a username and password.

—————————————-

10.0.0.1 is more commonly seen in business computer networks than in home networks where broadband routers normally use addresses in the 192.168.x.x series instead.

—————————————

Both the 10.x.x.x and 192.168.x.x series fall within private IP addres ranges.Being a private address, 10.0.0.1 cannot be used to connect to devices over the Internet.

————————————

How can I setup my router with 10.0.0.1?

——————————————

——————-

As mentioned above, 10.0.0.1 is used in many routers as their management IP, you can easily access your router with this IP to configure your router’s options and features.

—————————–

You can also setup your router’s proxy, DNS, DHCP client, wireless function, MAC address etc.

—————————-

The steps are as follows:

———————

First, open your browser and enter http://10.0.0.1 at the address bar, hit enter, it will show you the management console, you need to enter username and password which is usually marked at back of the router.

—————————————

Second, look through all the menus and pages, find network part, you can setup your network with dial-up/DSL method or others, enter username and password which you get from your network provider, setup DNS(8.8.8.8 and 8.8.4.4 are provided by google).

—————————————-

Third, setup wireless function if this part exists. Usually select WPA or WPE to ensure your wireless router’s safety.

—————————————–

How do I go to the address of 10.0.0.1

——————————————–

——————

To reach your device management control panel as authoritative thing you should do is pretty simple.

———————-

 You need to log in to address only http://10.0.0.1 you can copy this address into your internet browser, you can type it manually or with our site more easily, you can click the button.

————————-

 During this process we faced one of the errors that users are entering the wrong password is.

——————————–

İf you don’t know your username and password, you can learn from our description at the bottom

————————-

What are my router’s default username and password?

———————————————

—————————

If you don’t know or have forgotten username and password of your router, first please look carefully at different sides of your router, if there’s none, look them up in the manual book, or search them with google. Usually they are ‘admin’, ‘user’, etc.

——————————————-

What can you do if you forget your password by default?

If you forget your password, you must reset your device. Here’s the Default Modem Passwords:

Click here

 

192.168.0.1

192.168.0.1

——————–

It manage panel Address of your ADSL Modem.

———————-

Update software is managed by worldwide network that is loaded software into the device.

———————-

By this software and applications you can easily re-configure the settings by entering your information in case of any connection problems during experiencing internet.

——————–

The computer used to configure the router has several network cards, TCP/IP settings of network card are incorrect .

———————–

.A router or alternative network entree device on these networks is usually put in at 192.168.0.1, and alternative hosts use higher numbers within the area.

———————-

IP address 192.168.0.1 is the address of some home-use broadband router, it’s mainly the default value of a variety of D-Link and Netgear model routers.

——————–

 And you can change it using the network router management console at any time.

 192.168.0.1 is a private IPv4 network address.

—————————–

Home-use router can use it to set up the default gateway.

—————————-

 In this router, you can access its management console through a web browser at http://192.168.0.1

————————–

If routers or any computer of any brand on the local network get some problem, you can use this address or similar private IPv4 address(eg, 192.168.1.1) to solve it.

————————-

 It is suggested that any IP address on the network, only one piece of equipment to use 192.168.0.1, in order to avoid address conflicts.

———————————————–

——————

How to login to 192.168.0.1

————————-

To access the management console of your router copy http://192.168.0.1 into your web

when you reach the router admin login your username and password

———————-

Inside the admin panel you will be able to change all kinds of setting such as: DNS, IP allocation, Routing and many more.

————————-

Why I am not able to access 192.168.0.1?

————————-

IF you want to get access to your router, please identify whether your computer’s gateway is 192.168.0.1.

————————–

  Open CMD and type: ipconfig/all, or use this command: ping 192.168.0.1 -t.

——————

If the gateway address is 192.168.0.1 and it still can’t display the login window, perhaps it’s because the network port is not specified or there is a firewall.

————————

The ping command is a commonly used DOS command and it is used to detect whether the network is connected and the network speed is fast or not.

————————-

While in wireless router setup process we often use the ping command

————————-

If your router address is 192.168.0.1, click ‘Run’ (or use the key combination win + r) and enter CMD and then hit OK. Then enter ping 192.168.0.1, if the result returns timeout, it illustrates the network is disconnected or losing packages, it also means your computer can not connect to the router.

———————–

the reasons:

———————-
1, The router IP address is not 192.168.0.1, or you’ve mistaken it with 192.168.o.1.

———————-
2, The router has been shut down, and unable to be connected.

———————-
3, ICMP packet filtering is set up in the router (like firewall settings).

———————-
If you can receive some bytes, it means your network is connected, and you may be able to connect to a wireless router, the step is to enter 192.168.0.1 in your browser to try.

—————————-

How to get an Access into the Router Configuration Settings?

——————————

  • At first, check out whether your PC is connected to the router using the internet connector cable.
  • —————————
  • Now type the default IP address into the browser, and after a while, you will require to fill up the username and the password as well.
  • ————————–
  • Now check the user manual guide and used the information provide in there as it contains the information of the administrative login for the authentic of your identity and it will give you the access to the router admin page.
  • ————————-
  • When an error is in the process it may because your PC is not connected to the router, basically you will need to follow a couple of things like creating a connection by restarting the router or by turning on and off.
  • ————————–
  • Also, try to disconnect the network firewall for just a moment or try resetting your router to default settings if by chance your password got changed.
  • —————————-

What can be done with this IP?

———————————–

——————

192.168.O.1. IP address provides you to access your modem device with full authorization.

————————

You can make adjustments and playing on all transactions offered by the router software after login.

———————–

You can make following adjustments; Network Management, IP QoS, Security Options, Proxy, DNS, WLAN, LAN, WAN settings, DHCP client, DSL, WPS, MAC, ADSL blocking and the other adjustments. In this way, that’s not matter where you are, at home, at work, at schools, you can manage your internet.

—————————-

What can be done from 192.168.0.1.1 ?

 

————————————

——————–

If you enter the 192.168.0.1.1 wireless router IP address, you would have a full authorization on it.

————————–

 After accessing your management panel you can change the settings and configurations that your router software provides. After accessing, Security Options, Network Management, IP QoS, DNS, proxy, LAN, WAN, WLAN settings, DSL, ADSL, MAC, WPS block are adjustments that you can change. In this way, not only in the location of your wireless router, in the workplace, at school, at home, cafes and wherever you are, you can manage your internet easily.

—————————–

How to Connect 192.168.0.1 Router Login and Password?

——————————————-

——————–

IP address 192.168.0.1 is a private IPv4 address of the network which can be used in the home routers for creating a default gateway.

——————————

In that kind of router, you have the access to the management console indicating the http://192.168.0.1 with the help of the browser on your PC.

————————————-

Any brand of the router or PC in the local network connection due to this very reason the same private ipv4 address can be used. Remember that any of the IP address networks can be used only in one device for ignoring the conflicts of the address.

——————————————-

How to enter 192.168.o.1 address?

————————————————

———————

IF You want to reach  to your modem’s user interface, you can copy the address http://192.168.O.1 or type it manually to your browser.

———————————–

 Also with the help of the input button on our site, you can easily access as well.

——————————–

 One of the most common problem in this process is to enter the wrong password. If you don’t know modem (router) user ID or password, you can examine our explanation of “What to do” below.

——————————–

what can you do if you forget your default password for 192.168.0.1 ?

————————————————-

———————

Reset the modem device.

———————-

 All the modem devices have a hidden reset button on the back or bottom part of it.

———————–

if you hold down that button during 20 seconds with a thin and rigid stick like a toothpick, your device returns to factory settings.

—————————

when you reset for factory settings, your current internet connection will be lost. For that reason, we recommend you seek for an assistance from someone knowledgeable on this subject

—————————————

———————

192.168.1.2

192.168.1.2

——————–

———-

stands for an IP address which some router manufacturers use as a router default address.

——————–

In most of the cases, this IP address – 192.168.1.2 – is used by private home network computers.

——————-

This IP address belong to class C IP addresses, meaning it falls into the range that starts with 192.168.0.0 and goes through 192.168.255.255.

————————

Some of the frequently used private IP addresses belonging to this range are 192.168.1.1 and 192.168.2.1. (Those two mentioned IP addresses are perhaps more frequently used than 192.168.l.2.) .

————————-

It is  the default IP address for home broadband routers and access points are usually sold in some models other than American.

———————–

Use 192.168.1.2 to connect  to the router .

———————-

If the router uses the address on the local network for 192.168.1.2 , you can log on to the router’s  console through the web browser to point  to http://192.168.1.2

Some manufacturers using 192.168.1.2

—————————-

This IP address is set to the default of some PHILPS , God’s brain and some other routers and access points to manufacturer .

————————

However , any computer on a router or local network can be set to use 192.168.1. (in order to avoid the address conflict , it is only on the network that  a device should use it ) .

—————————-

192.168.1.2  is a private IPv4 network address , which means you can not connect to the router , use the address from outside the home network . Instead  , you must use the router’s public IP address .

—————————-

All companies produce a modem device in order to provide easy access to up to date software installs .

————————–

If the software application users from any internet connection problem when confronted with the device in a way that’s easy to control and modify the settings by accessing the features a chance

—————————–

What can you do with 192.168.1.2 ?

 ————————-

————–

if you make and enter IP address 192.168.1.2 , you will access the full electronic network as authoritative.

———————–

 The software for the router to offer wired and wireless device features and options, you can make the necessary repairs and, thanks to the required settings.

———————–

192.168.1.2 can be a Gateway or an IP address.

———————–

 This is something that can confuse some users.

———————-

 So if you want to find out whether it is an IP or a Gateway, just find Command, then type ipconfig /all , and you will be able to see all of it: IP Address subnet mask Default Gateway and DHCP server. Just see where 192.168.1.2 is and that’s it.

————————

When you access the administration panel of your device is DNS, PROXY, network management, WLAN (WiFi), LAN, WAN Protocol settings, Virtual routing, IP Qos, NAT virtual server, DMZ, a variety of security options, DHCP client, WPS, DSL, ADSL, blocking, and other MAC can perform easily different base adjustments.

———————————-

How Private IP Addresses Work

————————–

———-

There is no special meaning or value to individual private IP addresses — these are simply designated as “private” by the Internet Assigned Numbers Authority (IANA), the global organization that manages IP addresses.

————————

 A private IP address is used on a private network only, and cannot be accessed from the internet, but only by devices on the private network itself.

—————————

This is why modems and routers can operate easily using the same, default, private IP address.

———————

To access a router from the internet, you must use the router’s public IP address.

The range of addresses reserved by IANA for use on private networks is in the range of 10.0.x.x, 172.16.x.x and 192.168.x.x.

————————-

Why is 192.168.1.2 So Common?

————————-

Manufacturers of routers and access points must use an IP address within the private range.

———————

Early on, mainstream broadband router manufacturers like Linksys and Netgear chose the 192.168.1.x as their default.

———————–

 Although this private range technically begins at 192.168.0.0 ,

 most people think of a number sequence as starting from one rather than from zero, making 192.168.1.1 the most logical choice for the beginning of a home network address range.

—————————

With the router assigned this first address, it then assigns addresses to each device on its network. The IP 192.168.1.2 thus became the most common initial assignment.

————————–

A networked device does not gain improved performance or better security from its IP address, whether it is 192.168.1.2, 192.168.1.3 or any other private address .

————————-

192.168.1.2 IP Address

—————————–

————–

One of the main features of private IP addresses is that they can not make your computer recognizable outside your home or office network (or on the Internet).

————————–

 That fact brought up an issue on their accessibility and question about their good and bad sides.

————————–

But if taken to consideration all the threats coming from the Internet, it turned out that the private IP addresses are pretty useful stuff in this point.

————————

Private IP address mean that the IP address is used in private networking (home or office for example/0 and outside the internet (this is where you should make a distinction : home network may be connected to the internet , but that does not make them the parts of the internet .

———————

IP address can be static and dynamic .

IP address (also called fixed IP address ) is the same every time you turn on your computer  ——————–

Dynamic IP address is automatically assigned on broadband network by DHCP servers .

Regarding the internet sessions , dynamic IP addresses are temporary .

—————————

How do I go to the address of 192.168.1.2?

————————————-

—————–

When connecting to the Internet, the router serves as a gateway. Speaking of router, its major functions are transferring information and making sure where the information actually goes in the end.

——————–

It defines a path (a route) through which the data will be transferred.

——————–

It is important that data end up just in the place where it is needed, not in wrong destinations.

———————–

Router joins different networks, passes the information to one another and in the same time prevents data from unnecessary spill over and going around through more networks than it is needed – that would be – something like preventing information from flowing into all directions without control.

————————-

The name itself tells about its function of making a route for the data. Logically, to do that, it must be located where the networks meet.

————————-

While your modem management control panel in order to achieve a fully qualified , you have to do is quite easy.

———————-

 Just simply login to http://192.168.1.2.

———————

You can type the address into your browser , you can copy or you can log in by clicking on the button on our site.

————————-

faced the most users is to enter the wrong password errors.

————————

 If you don’t know your username and password, you must follow our writing on ways you can learn from our under annotation.

——————————-

What can you do if you forget your password by default?

If you forget your password, you must reset your device. Here’s the Default Modem Passwords:

Click here

 

192.168.1.2

192.168.1.2

——————

192.168.1.2 It is IP that can manage your modem.

———————–

It is a private IP address that is default for certain models of home broadband routers typically sold outside of united states .

—————————

It is also frequently assigned to individual devices within a home network when a router has an IP address of 192.168.1.1 .

—————————

 As a private IP address , 192.168.1.2 dosnot need to be unique across the entire internet , but only within its own local network.

 ————————

If a router is using address 192.168.1.2 on the local network , you can log into its administrative console by entering its IP address into your web browser .

——————————

Use 192.168.1.2 IP to connect to the router .

————————–

To make network devices easily to manage , Production companies load their own software program in their products of network device .

—————————–

The router will prompt for an administrator username and password .

—————————

 All routers are configured with default usernames and passwords by the manufacturer.

——————————-

The most common default usernames are “admin”  , “1234” or none .similarly the most common password are “admin” ,”1234″ or none along with user .

—————————

The default username / password combination is usually stamped on the bottom of the router .

 —————————–

It is usually not necessary to access the router’s administrative console , but might be useful is you are having connection problems .

——————————- 

We can resolved modem, network settings, renewing the user interface, password changes by using the internet .

——————————

While this IP address is set as adefault by the manufacturer for some router , any router or computer on local network can be set to use 192.168.1.2 .

———————————

 

What is the benefit of with 192.168.l.2 ?

——————————

 

When you enter 192.168.1.2  IP address in your browser , you become the administer of your modem device and can make connection on the network.

———————————

The product for the switch to offer wired and remote gadget element and choiced , you can make the important repairs  .

 ——————————

When you use that IP to log on to the management panel ,you will be qualified for setting (network management, security options, IP Qos, DNS, Proxy, LAN, WAN, WLAN settings, DSL, DHCP client, PPPOE, MAC, WPS and DSL).

———————————-

Blocking and other adjustments are available.

————————–

Manufacturers of routers and access points must use an IP address within the private range .

——————————–

Early on , mainstream broadband router manufacturers like Linksys and Netgear chose the 192.168.1.x as their default .

———————————-

Although this private rang technically begins at 192.168.0.0 , most people think of a number sequence as starting from one rather than from zero  , making 192.168.1.1 the most logical choice for the beginning of a home network address range.

————————————

With the router assigned this first address  , it then assigns addresses to each device on its network .

———————————-

The IP 192.168.1.2 thus became the most common initial assignment .

——————————–

A networked device dos not gain improved performance or better security from its IP address , whether it is 192.168.1.2 ,192.168.1.3 or  any other private address.

——————————–

How do I enter the address 192.168.l.2

———————-

IF you want to access your command panel for modem device , you have to type http://192.168.1.2  , or you have to copy it to your own browser address bar . or you have to click the shortcut IP address button .

————————-

IF you don’t have to remember your password ,you have to follow this instruction.

—————————-

 

What you can do when you forget your password or when you do not know your password ?

————————–

 

When you forget your password ,  you can solved this problem by only way , you have to resetting your device .

——————————

Resetting is not complex , it is simple , you can do it by holding the rest button that is generally atiny button at the bottom or back of your devices .

——————————

but you should have knowledge to do it , if you do not have experience in doing it , you should not touch it .

—————————–

Here’s the Default Modem Passwords :

Click here

 ——————————-

Assigning 192.168.1.2 to a Device

—————————

Most networks assign private IP addresses dynamically using DHCP.

————————-

This means that a device’s IP address can change or be reassigned to a different device.

————————–

Attempting to assign this address manually (a process called “fixed” or “static” address assignment) is also possible ,

but can result in connection issues if the network’s router is not configured accordingly.

————————-

Here’s how IP assignment works:

——————–

Each local router that uses DHCP is configured with a range of private addresses it can allocate to clients.

————————–

On a home router with 192.168.1.1 as its default local address, the default set of client addresses ranges from 192.168.1.2 to 192.168.1.254.

—————————

Most routers will assign IP addresses to network devices starting at the beginning of the range, so you will rarely see an IP address on your network in the higher ranges.

—————————

A router will generally not check whether 192.168.1.2 (or any other address in this range) has already been assigned to a client manually before assigning it to a client automatically.

—————————

This can cause an IP address conflict in which two devices on the same local network attempt to use the same one IP address .

———————————

An IP address conflict will disrupt the network communication of both devices.

——————————–

For these reasons, it’s usually recommended that you allow your router to control the assignment of IP addresses within your home network .

———————————–

——————

192.168.2.1

192.168.2.1

———————-

is a private IP address commonly used by the SMC and Belkin router manufacturers for device setup and troubleshooting.

—————————

SMC and Belkin specialize in manufacturing home networking equipment that competes with Netgear, D-Link, and Linksys brands in the marketplace .

——————————–

The Internet Assigned Numbers Authority (IANA) does not grant exclusive use of the IP address to these companies;

 however, as other network equipment manufacturers are free to use the IP address if required or desired.

———————————

 If another router or networking device is installed on a local network which uses 192.168.2.1,

the address can be changed by using the respective router’s administrative configuration panel .

——————————–

The most common use for the IP address; however, is to initially setup or change the configuration on the Belkin and SMC routers.

 —————————————————

——————–

192.168.2.1

———————

It is IP that let you to acess authoritative panel to your modem management ;

It is common factory default IP for router , access point or other network devices which are manufactred by Belkin , Smc .

———————————————————–

———————–

192.168.2.1

———————

It is the local network default.

——————— 

IP address  for some home broadband router including almost all Belkin models and some models made by Edimax, Siemens and SMC .

—————————-

This IP address is set on certain brands and models when first sold , but any router or computer on a local network can be configured to use it.

——————————

This IP allow user to get access to their administration panels .

—————————

You can access the router management page by pointing to this IP by using web browser for doing initial setup.

——————————-

Domestic and Foreign network modem were produced to be easily to acess devices.

———————————–

This software and applications help user of the internet to solve problem of connection we faced because of these devices.

———————————-

We solved this problem  by providing access to setting easily alter .

——————————

All routers have an IP address which you can use to connect to the router’s administrative console and configure its settings.

—————————–

You may never need to access these settings, as most home routers provide a wizard-like interface that walks you through setup.

———————————–

However, if you have problems installing your router or you want to perform some advanced configuration, you may need to access the router’s console.

———————————————————–

 —————–

What can be done from this IP?

——————

 

When you log in by using this ip address 192.168.2.1 , your device reached to full authority .

—————————

Enter IP 192.168.2.1 address  , will let you to get a full approval on it .

—————————

After you have got your administration panel , it will be possible for you to arrange that router brings with itself .

 —————————–

When you getting access to router administration, it will be possible for you to make setting DNS ,PROXY ,Netwark management , LAN , WAN ,WLAN (WIFI) ,protocol setting ,NAT virtual server , IP Qos ,DMZ ,variety of security options , DHCP customer , WPS , DSL ,ADSL ,MAC are conformity to the block .

—————————————————

——————-

How Does an Internet Protocol (IP) Address Work?

———————–

An IP address is made up of a 32 bit number divided into octets.

—————————–

An IP address is used to help identify and address network capable devices that are connected to computer networks that support the IP protocol.

——————————

Each of the octets that make up an IP address has 8 positions in binary form that have 32 bits. The bit positions in an octet can have a value of 0 or 1 with a total number of 256 numbers possibly assigned to each octet.

——————————-

In the IPv4 implementation of the IP addressing concept there are approximately 4.3 billion possible addresses.

————————

The IANA reserves certain blocks of addresses for special uses to include 255.255.255.255 for network broadcasts, 127.0.0.1 for loopback addressing, and private IP addresses such as 192.168.2.1.

—————————————— 

—————–

192.168.2.1’s Use as a Default IP Address

———————–

SMC and Belkin use 192.168.2.1 as a default IP address for network router configuration in the home, small business, or school.

————————–

 The address is in the private address range defined by the IANA under the IETF authority.

—————————-

Other commonly used private IP address for router configuration include 192.168.1.1 and 192.168.0.1 that are used by competing companies to the SMC and Belkin companies.

—————————-

 End-users most commonly use 192.168.1.1 to connect to the home router to setup the initial Internet connection, wireless LAN, or to change network security settings.

————————–

The address can also be used to troubleshoot network connectivity issues and conduct other network functions.

——————————————————————–

How do I go to the address 192.168.2.1?

———————

You have get to control panel of your modem , then you must login to IP address http//192.168.2.1 .

——————————

Enter this address into your browser , you van copy it manual or click on the button on your site.

————————-

If you do not know your user name and password , you can find out from the bottom .

—————————-

In case you don not have a clue about  your password and username , you can  look for useful information below .

—————————-

In case you forgot your password , you must reset your router .

——————————————–

 ——————–

1 2 3 4