10.0.0.1

Router Username and Password List

10.0.0.1 Modem device .

——————————

 It allows you to access the administration panel as a full official address is.

————————————-

 Is the production of almost all modems, networking firms as the short time and easy accessible to devices provide software to date on behalf of the frontier.

———————————–

 Thanks to this software and application users from any internet connection problem when they live their devices can access in an easy way and can have a chance to change by checking the settings.

———————————

Is a class A IP address which is reserved for private network, we can usually see this IPV4 address used by router factories as their routers’ default gateway address.

——————————

 Other commonly used reserved IP addresses are 192.168.1.1 and 192.168.0.1.

——————————–

 Comparing to public IP addresses(if you are using a dial-up network, you can check your public IP at many websites) which need to be unique in the entire internet, 10.0.0.1 need to be unique in its own local area network.

——————————-

 So it’s very convenient using this IP address to setup your own network such as company’s local network, school’s local network.

——————————

The IP address 10.0.0.1 is sometimes used as a default local address for network router .

—————————

 Some Cisco brand routers and Infinity routers supplied by Comcast commonly have 10.0.0.1 as their default.

——————————

This same address may be used instead by any other private network device but by convention is normally assigned to a network gateway  or other kind of network server .

———————————

What is a Gateway Address?

10.0.0.1 is called a  default gateway address when it represents the local side of a router or  wireless access poin connection to the Internet.

——————————-

Client devices see this address appear in their TCP/IP network gateway settings after joining the local area network (LAN).

—————————————–

 In classful IP networks, 10.0.0.1 is a Class A address with default subnet mask 255.0.0.0.

————————————

What can be done with 10.0.0.1 ?

——————————————————

————————-

When you enter the ip address of 10.0.0.1  if your device as you have reached the full authority electronic network.

—————————

 Within the router software on your device to offer options and features, you can perform the required settings and fixes.

——————————-

By accessing the administration panel of your modem PROXY, DNS, network management, WLAN (WiFi), LAN, WAN Protocol settings, Virtual routing, IP Qos, NAT virtual server, DMZ, a variety of security options, DHCP client, WPS, DSL, ADSL, MAC can perform basic blocking and many other adjustments.

———————————-

Use the ping utility to determine whether any device on the local network is actively using 10.0.0.1.

—————————

If assigned to a router, administrators can reach its console by pointing a Web browser to

http://10.0.0.1 

that in turn will prompt for a username and password.

—————————————-

10.0.0.1 is more commonly seen in business computer networks than in home networks where broadband routers normally use addresses in the 192.168.x.x series instead.

—————————————

Both the 10.x.x.x and 192.168.x.x series fall within private IP addres ranges.Being a private address, 10.0.0.1 cannot be used to connect to devices over the Internet.

————————————

How can I setup my router with 10.0.0.1?

——————————————

——————-

As mentioned above, 10.0.0.1 is used in many routers as their management IP, you can easily access your router with this IP to configure your router’s options and features.

—————————–

You can also setup your router’s proxy, DNS, DHCP client, wireless function, MAC address etc.

—————————-

The steps are as follows:

———————

First, open your browser and enter http://10.0.0.1 at the address bar, hit enter, it will show you the management console, you need to enter username and password which is usually marked at back of the router.

—————————————

Second, look through all the menus and pages, find network part, you can setup your network with dial-up/DSL method or others, enter username and password which you get from your network provider, setup DNS(8.8.8.8 and 8.8.4.4 are provided by google).

—————————————-

Third, setup wireless function if this part exists. Usually select WPA or WPE to ensure your wireless router’s safety.

—————————————–

How do I go to the address of 10.0.0.1

——————————————–

——————

To reach your device management control panel as authoritative thing you should do is pretty simple.

———————-

 You need to log in to address only http://10.0.0.1 you can copy this address into your internet browser, you can type it manually or with our site more easily, you can click the button.

————————-

 During this process we faced one of the errors that users are entering the wrong password is.

——————————–

İf you don’t know your username and password, you can learn from our description at the bottom

————————-

What are my router’s default username and password?

———————————————

—————————

If you don’t know or have forgotten username and password of your router, first please look carefully at different sides of your router, if there’s none, look them up in the manual book, or search them with google. Usually they are ‘admin’, ‘user’, etc.

——————————————-

What can you do if you forget your password by default?

If you forget your password, you must reset your device. Here’s the Default Modem Passwords:

Click here